Safest Latin America

Engineer of construction control (welding, general construction works) up to 77,000 rubles. on hand

SGS Vostok Limited

SGS Vostok Limited Work experience required: 1–3 years

Full time shift method

SK ENGINEER (WELDING / HOUSING CONSTRUCTION)

EXIT VERY URGENT!

CONSIDER THOSE WHO CAN GO IN A WEEK WEEK, THE MAXIMUM 2-X.

Construction control for an oil and gas company at the Novy Urengoy field

Higher education / secondary special education; Experience in the NC on objects NGDO; NAX; VIC; SK (preferably) LDCs (desirable) If VIC or NAKS are overdue, there is a possibility of extension.

Control over the testing of materials, the timeliness of sampling products for testing used in construction, for compliance with the specifications of the manufacturer and the signing of relevant documentation; Verification and confirmation of the general contractor’s readiness to perform construction work (availability of permits, approvals, qualified personnel, equipment, compliance of quality control laboratories, necessary measuring instruments and test equipment, its full availability and working condition, observance of metrological rules on the use of measuring tools, completeness of design tools regulatory and technical documentation at the construction site); Control over the quality of production and acceptance of construction and specialized works; Verification of the compliance of the work production process, the quality of work and the identification of deviations (hereinafter – "inconsistencies") from the project, regulatory documents and technical regulations, compliance with the technology of general construction, installation and special works with the obligatory reflection of the results of the check in the General Work Log and issuing prescriptions; Conducting an operational quality control of the Contractor’s work in accordance with the developed operational control cards for the types of work using visual, instrumental and physical methods and documented clearance; Acceptance of hidden works with the design of the relevant documentation or relevant permits; Verification of documentation (data sheets, certificates, laboratory results, and

PLACE OF WORK: New Urengoy

Fixed-term employment contract until 2020 (white sn, with entry to employment); Watch Schedule: 60 working days, 30 days off-duty rest Life insurance; Annual leave is 28 calendar days; Annual additional leave – 19 calendar days; Payment for 5 calendar days of disability up to 100% at the expense of the employer; Preferential experience for work in the regions of the Far North; Provision of corporate housing for a rotational period. Road payment; The organization of delivery from Novy Urengoy to the place of actual work; Issuance of workwear.

77,000 – for a shift month of 30 days, 13,000 – break-up rest for 30 days.

About the IHS Markit IHS Markit We have been able to provide well-informed, confident decisions. We call this The New Intelligence. IHS markers more than 140 countries, including 80 percent of the Fortune Global 500 countries. automotive, engineering, technology, maritime and trade, aerospace and defense. Headquartered in London, IHS Markit (Nasdaq: INFO) is committed to sustainable, profitable growth. Africa: Basin Researcher: Africa; You can be working with the IHS Markit database. This position is based on our Moscow office.

IHS Markit For our customers, I’ve been able to find out how to do this. The Oracle Database is an area of ​​research; The position also supports the geological spatial layers in the Energy-GIS products.

Job Responsibilities: • The Oracle Database of petroleum basins. • Conduct technical data review projects in conjunction with the basin and E&P databases updates. • Use various computer applications, including GIS tools; • Write the different sections of the basin and the racks; • Define basin limits through available structural geological images (structural map, regional cross sections, stratigraphic charts, etc). • Search for analysis of the frontier basins and assist in their basin definition. • Complete the specified number of Basin Monitor reports per year. • Maintain the Iris 21 Basin Databases (Geological Provinces, Plays, Petroleum Systems Stratigraphy and Bibliography) on request from regional team members. • Maintain geological spatial layers with GIS tools for Africa region. • Participate to IHS Markit Insight analysts. • Attend industry-related events. • Publish paper (s) in geoscience-related subject is essential. Post-graduate geoscience qualification preferred.

Required Experience: • Strong industry or academic background or experience • Experience with data analysis software such as Excel, Access, Power BI, etc., and GIS tools such as ESRI ArcMap

Other Skills: • Good technical knowledge on Africa basins, petroleum systems, plays, and stratigraphic units. • Ability to prioritize • • • • • • • • • Knowledge of other language (s) such as Arabic, French or Portuguese is a plus. • IT skills including ESRI GIS systems. • Proven experience in scientific writing and publication

Please note that

About the IHS Markit IHS Markit We have been able to provide well-informed, confident decisions. We call this The New Intelligence. IHS markers more than 140 countries, including 80 percent of the Fortune Global 500 countries. automotive, engineering, technology, maritime and trade, aerospace and defense. Headquartered in London, IHS Markit (Nasdaq: INFO) is committed to sustainable, profitable growth. _______________________________________________________________________________________ Title: Europe: Basin Researcher: You can be working with the IHS Markit database. This position is based on our Moscow office.

IHS Markit For our customers, I’ve been able to find out how to do this. The Oracle Database is an area of ​​research; The position also supports the geological spatial layers in the Energy-GIS products.

Job Responsibilities: • An Oracle Database of petroleum basins. • Conduct technical data review projects in conjunction with the basin and E&P databases updates. • Use various computer applications, including GIS tools; • Write the different sections of the basin and the racks; • Define basin limits through available structural geological images (structural map, regional cross sections, stratigraphic charts, etc). • Search for analysis of the frontier basins and assist in their basin definition. • Complete the specified number of Basin Monitor reports per year. • Maintain the Iris 21 Basin Databases (Geological Provinces, Plays, Petroleum Systems Stratigraphy and Bibliography) on request from regional team members. • Maintain geological spatial layers with GIS tools for Europe region. • Participate to IHS Markit Insight analysts. • Attend industry-related events. • Publish paper (s) in scientific journals and / or oral presentation (s) in international conferences.

Required Education: A Geoscience-related subject is essential. Post-graduate geoscience qualification preferred.

Required Experience: • Strong industry or academic background or experience • Experience with data analysis software such as Excel, Access, Power BI, etc., and GIS tools such as ESRI ArcMap

Other Skills: • Good technical knowledge on Europe basins, petroleum systems, plays, and stratigraphic units. • Ability to prioritize • • • • • • • • • Knowledge of other language (s) such as Spanish, French, German, Portuguese … etc. is a plus. • IT skills including ESRI GIS systems. • Proven experience in scientific writing and publication.

Please note that

Required work experience: 3–6 years

Full time, full day

Responsibilities: Inspection at all sites of production and shipment of electrical equipment;

Preparation of the inspection report in the agreed form.

Requirements: Higher technical education. Experience in conducting technical inspections in the manufacture and shipment of industrial electrical equipment, power plants, transformer substations from 2 years

Electrical safety qualification certificate: IV – V group;

Conditions: technical inspection at plants for the production of complex transformer substations.

Factories on the territory of the Russian Federation: Orenburg, Samara regions, Tatarstan, Bashkiria

Duration of the project December 2018 – December 2019

Required work experience: 3–6 years

Full time, full day

Responsibilities: Inspection at all sites of production and shipment of electrical equipment;

Preparation of the inspection report in the agreed form.

Requirements: Higher technical education. Experience in conducting technical inspections in the manufacture and shipment of industrial electrical equipment, power plants, transformer substations from 2 years

Electrical safety qualification certificate: IV – V group;

Conditions: technical inspection at plants for the production of complex transformer substations.

Factories on the territory of the Russian Federation: Orenburg, Samara regions, Tatarstan, Bashkiria

Duration of the project December 2018 – December 2019

Required work experience: 3–6 years

Full time, full day

Responsibilities: Inspection at all sites of production and shipment of electrical equipment;

Preparation of the inspection report in the agreed form.

Requirements: Higher technical education. Experience in conducting technical inspections in the manufacture and shipment of industrial electrical equipment, power plants, transformer substations from 2 years

Electrical safety qualification certificate: IV – V group;

Conditions: technical inspection at plants for the production of complex transformer substations.

Factories on the territory of the Russian Federation: Orenburg, Samara regions, Tatarstan, Bashkiria

Duration of the project December 2018 – December 2019

Geophysics of the 1st category and geologists with experience in GTI (geological and technological studies of oil and gas wells) are required for at least 3-4 years.

Company Employer: LLC "OILPROMSERVICE". Equipment used: stations "GEOTECH" – hardware-software complex for collecting processing and analyzing data on the well construction process.

The shift method of work in the regions: Republic of Tatarstan, Samara region, Orenburg region – 30/30 (30 days after 30 days). Salary on interview up to 3500 rubles per day (Without experience we do not consider).

In the case of a positive result of consideration of your candidacy, you will be sent an invitation to work. We are waiting for your resume on our E-mail.

Geophysics of the 1st category and geologists with experience in GTI (geological and technological studies of oil and gas wells) are required for at least 3-4 years.

Company Employer: LLC "OILPROMSERVICE". Equipment used: stations "GEOTECH" – hardware-software complex for collecting processing and analyzing data on the well construction process.

The rotational work method in the regions: the Republic of Tatarstan, the Samara region, the Orenburg region – 30/30 (30 days in 30 days). Salary on interview up to 3500 rubles per day (Without experience we do not consider).

In the case of a positive result of consideration of your candidacy, you will be sent an invitation to work. We are waiting for your resume on our E-mail.

Safest Latin America

Requires geophysics with experience in the GTI (geological and technological research of oil and gas wells) for at least 3-4 years.

Company Employer: LLC "OILPROMSERVICE". Equipment used: stations "GEOTECH" – hardware-software complex for collecting processing and analyzing data on the well construction process.

The rotational work method in the regions: Republic of Tatarstan, Orenburg region – 30/30 (30 days in 30 days). Salary 3000 rubles per day (Without experience we do not consider).

In the case of a positive result of consideration of your candidacy, you will be sent an invitation to work. We are waiting for your resume on our E-mail.

Position: Well testing supervisor at the Floating drilling rig (PBU). Salary: Contractual Employment: Rotation method. Requirements: The well testing supervisor should have: • Profile higher education in the specialty (“Drilling of oil and gas wells”, “Oil and gas geology”, etc.); • General experience in the direction of well testing for at least 8 years, including at least 3 years in the position of technologist / test supervisor; • Experience in offshore drilling rigs for at least 3 years; • Experience in wells with an underwater mouth of not less than two pieces. • The presence of a medical certificate of admission to work in the conditions of the Far North; • Have a proficiency in English (conversational, writing, technical). Valid certification for: • General industrial safety requirements (A1). • Industrial safety requirements in the oil and gas industry (

Responsibilities: – Interaction with technical and geological specialists; – Participation in the setup and closing meetings; – Verification and analysis of project documentation for the construction of the well (in terms of testing) and providing recommendations on how to optimize the provisions of the Working draft and work plans; – Verification of permits from contractors / subcontractors for well testing; – Full control of all work associated with the testing / development of wells at the FPS; – Coordination with the Customer of work that does not comply with the test program; – Collection and operational analysis of the results obtained during the test wells. Issuance of recommendations to the Customer’s representative at the Rig; – Compilation and timely provision of daily reports in the process of well testing in Russian and English; – Verification and confirmation of the actual volume of work rendered by contractors / subcontractors to test wells in the acts of beginning and ending stages; – Preparation and provision of reporting documentation to the Customer: DAILY: • Daily Report on well testing (certified by a signature); • Operational reports; • Schedule of further works with a planning horizon of one (1) and seven (7) days; • Reports on consumption / receipts / balances of materials, equipment at SSDR, support vessels and the supply base; WEEKLY: • Report + photo report on the state of affairs and the environmental situation at the facility; • Reports on the availability of equipment at the Customer’s facilities, a report on the movement of personnel, a report on loading and movement of provision vessels with test equipment and personnel, and also providing the Customer upon request of this information (provided within 24 hours of the request). MONTHLY: • Acts of non-compliance with the items issued orders for the current month, with an indication of violations and the attachment of relevant documents; • Acts confirming unproductive time; • Report of the Specialist on the preparation and testing of the Well during its stay at the Drilling Rig – the day after leaving the Drilling Rig; • Information for the current month on the identification of violations for which the cost of the well construction work is being reduced for deviating from the terms of the contract for performing drilling operations, service support contracts for well construction; • Monthly submission to the Customer’s representative of the consolidated material report on the movement of equipment and personnel at the Rig, agreed with the Contractor. PERIODICALLY (as necessary): • Acts of investigation of cases of unproductive time, accidents and incidents.

Not later than 3 (three) weeks after the well’s liquidation, the Contractor shall send the Customer a Final Report on the maintenance of well testing services.

Conditions: Direct employer. Salary is discussed individually according to the results of the interview. Seasonal work during the periods July – October / November 2019, 2020, 2021. Possible work in the period December – June on the land projects of the Russian Federation. Employment according to the labor legislation of the Russian Federation. Work traveling or rotational nature, offshore fields, 30/30 days. Base City – Moscow, area of ​​work – about. Sakhalin.

Contact information: Head of Human Resources CJSC "Oil Service Technology" Stepchenkova Natalya Alekseevna

Higher education in the field of:

“Development and operation of oil and gas fields”

“Geology and exploration of oil and gas fields”

“Drilling of oil and gas wells”

Experience – at least 5 years at the level of a master (technologist) of KRS, development and testing of gas wells and at least 3 years as a field supervisor of KRS, development and testing of gas wells.

Experience working with Achimov deposits.

Experience in the gas and gas condensate fields of the YNAO.

Good computer skills, knowledge of MS Office, ability to work with reports, analytical skills with technical data.

Fundamental knowledge of cattle technology, current regulatory documents and safety rules in the oil and gas industry.

Current document on training courses: "Well control". "Well control at GNVP".

High performing discipline, ability to work in a team, initiative, decency, professionalism.

The presence of a driver’s license category "AT".

Work traveling or rotational nature. Autonomous deposits. Watch 30/30 days. The base city is Moscow, for those living outside the YNAO.

Probationary period – 3 months: Salary by agreement.

Responsibilities: Analyze the actual performance of work, violations, complications and accidents. Develop recommendations for avoiding unproductive time, complications, accidents in the process of overhaul, well development and work with coiled tubing and hydraulic fracturing. To control the execution by the contractors of approved and agreed programs, process schedules, instructions, plans and schedules of work. To control compliance by the contractors with the Safety Rules in the oil and gas industry and the standards of the Customer. On the basis of the design and estimate documentation, recommendations of the Customer and the effective practice of workover works, develop and draw up technological regulations, workover work programs, work plans and technical tasks. To control the compliance by the performers of the workflows with the technological parameters of the production processes, the use of appropriate equipment and the execution of the approved terms of work. Immediately respond to any deviations in the work process, report to the immediate supervisor, prevent work with any violations and draw up relevant documents. In coordination with the management, to stop the production process in case of violation by the performers of the programs, technological regulations, instructions, work plans, if this does not entail any complications. Generate consolidated reports in accordance with the requirements of the company and the customer. Be present at the work site. To hold meetings with the contractors at the facility, in order to clarify the requirements of the Customer. Offer direct supervisor the most effective ways to solve problems, based on the situation at the facility. Consider and prevent possible technical risks in the process of work. Participate in the technical assessment of the qualification level of counterparties and specialists of the contractors. Control the timely provision of production with the necessary materials and equipment.

Contact details:

Efimenko Yuri Evgenievich +7 (906) 701-23-99

Klimchuk Vladislav Yakovlevich +7 (903) 765 75 71

Office – 7 (499) 643 82 69

Qualification – mining engineer.

Higher education in the specialty "Drilling oil and gas wells", "Development and operation of oil and gas fields".

Experience: – at least 5 years at the level not lower than the master (technologist) of KRS, development, – at least 3 years as a field supervisor of the KRS, development, CT and hydraulic fracturing – necessarily. – Experience working with Achimov deposits is a must!

Good computer skills, knowledge of MS Office, ability to work with reports, analytical skills with technical data.

Fundamental knowledge of cattle technology, current regulatory documents and safety rules in the oil and gas industry.

Current document on training courses: "Well control". "Well control at GNVP".

High performing discipline, ability to work in a team, initiative, decency, professionalism.

The presence of a driver’s license category "AT".

Analyze the actual performance of work, violations, complications and accidents.

Develop recommendations to prevent unproductive time, complications, accidents in the process of overhaul, well development and work with the CT and fracturing.

To control the execution by the contractors of approved and agreed programs, process schedules, instructions, plans and schedules of work.

To control compliance by the contractors with the Safety Rules in the oil and gas industry and the standards of the Customer.

On the basis of the design and estimate documentation, recommendations of the Customer and the effective practice of workover works, develop and draw up technological regulations, workover work programs, work plans and technical tasks.

To control the compliance by the performers of the workflows with the technological parameters of the production processes, the use of appropriate equipment and the execution of the approved terms of work.

Immediately respond to any deviations in the work process, report to the immediate supervisor, prevent work with any violations and draw up relevant documents.

In coordination with the management, to stop the production process in case of violation by the performers of the programs, technological regulations, instructions, work plans, if this does not entail any complications.

Safest Latin America

Generate consolidated reports in accordance with the requirements of the company and the customer.

Be present at the work site.

To hold meetings with the contractors at the facility, in order to clarify the requirements of the Customer.

Offer direct supervisor the most effective ways to solve problems, based on the situation at the facility.

Consider and prevent possible technical risks in the process of work.

Participate in the technical assessment of the qualification level of counterparties and specialists of the contractors.

Safest Latin America

Control the timely provision of production with the necessary materials and equipment in accordance with the work program.

To prevent the occurrence of unproductive time, complications, accidents, accidents.

Conditions: Income level: from 60 000 – 70 000 rubles for 15 days and above. By agreement.

Work on a rotational basis. Work area – New Urengoy. Work traveling nature.

The company offers competitive, stable and timely wages, the ability to grow and develop in the company.

Direct employer. Probationary period – 3 months: Wages by agreement.

Contact details: Efimenko Yuri Evgenievich (

Qualification – mining engineer. Higher education in the specialty "Drilling oil and gas wells".

Experience in drilling – at least 5 years at the level not lower than the drilling foreman, – at least 3 years as a field supervisor in drilling.

Good computer skills, knowledge of MS Office, ability to work with reports, analytical skills with technical data.

Fundamental knowledge of well drilling technology, current regulatory documents and safety rules in the oil and gas industry.

Current document on training courses "Well control at OGVP".

High performing discipline, ability to work in a team, initiative, decency, professionalism.

Analyze the actual performance of work during the drilling of wells, violations, complications and accidents.

Develop recommendations to prevent unproductive time, complications, accidents during the construction of wells.

To control the execution by the contractors of approved and agreed programs, process schedules, instructions, plans and schedules of work.

To control compliance by the contractors with the Safety Rules in the oil and gas industry and the standards of the Customer.

On the basis of the design and estimate documentation, recommendations of the Customer and effective drilling practice, develop and draw up process schedules, well drilling programs, work plans and technical specifications.

To control the compliance by the performers of the workflows with the technological parameters of the production processes, the use of appropriate equipment and the execution of the approved terms of work.

Immediately respond to any deviations in the work process, report to the immediate supervisor, prevent work with any violations and draw up relevant documents.

In coordination with the management, to stop the production process in case of violation by the performers of the programs, technological regulations, instructions, work plans, if this does not entail any complications.

Generate consolidated reports in accordance with the requirements of the company.

Be present at the work site.

To hold meetings with the contractors at the facility, in order to clarify the requirements of the Customer.

Offer direct supervisor the most effective ways to solve problems, based on the situation at the facility.

Consider and prevent possible technical risks in the process of work.

Participate in the technical assessment of the qualification level of counterparties and specialists of the contractors.

Control the timely provision of production with the necessary materials and equipment in accordance with the work program.

To prevent the occurrence of unproductive time, complications, accidents, accidents.

Conditions: Income level: from 60 000 rubles for 15 days and above. By agreement. Work on a rotational basis

The company offers competitive, stable and timely wages, the ability to grow and develop in the company. Direct employer. Probationary period – 3 months:

Contact details: Efimenko Yuri Evgenievich (

Position: Supervisor of Geology at the Floating Drilling Rig (PBU). Salary: Contractual Employment: Rotation method.

Requirements: A geology supervisor should have: • Profile higher education in the specialty (“Drilling of oil and gas wells”, “Geology of oil and gas”, etc.); • General experience in the direction of a geologist for at least 8 years, including at least 3 years as a technologist / supervisor for geology; • Experience in offshore drilling rigs for at least 3 years; • Experience in wells with an underwater mouth of not less than two pieces. • The presence of a medical certificate of admission to work in the conditions of the Far North; • Have a proficiency in English (conversational, writing, technical). Valid certification for: • General industrial safety requirements (A1). • Industrial safety requirements in the oil and gas industry (

Responsibilities: – Interaction with technical specialists, procurement specialists and other specialists of the Customer; – Participation in the setup and closing meetings; – Verification and analysis of the project documentation for the construction of the well (in terms of geology) and the provision of recommendations for optimizing the provisions of the Working draft and work plans; – Control of movement of SSDR and installation (positioning) in precisely specified coordinates; – Verification of permits from contractors / subcontractors (in terms of geology, GTI); – Full control of all work related (in terms of geology) wells at the FPS; – Supervise at the FPSP compliance with the requirements of labor protection and safety, fire and anti-fountain safety, environmental protection; – Coordination with the Customer of work that does not comply with the drilling / well testing programs; – Geological description of sections of the recovered core material; – Geological description of cuttings washed out during the drilling process, analysis of gas indications, geological interpretation of LWD and MWD data (monitor the well trajectory of the wellbore), comparison with the design geological section and actual reference; – Operational geological interpretation of cable log data; – Preparation and timely provision of daily reports in the course of the Work in the Russian and English languages; – Organization and participation in meetings with the Drilling Contractor and / or service contractors; – Verification and confirmation of the actual volume of work rendered by contractors / subcontractors (in terms of geological support) in the acts on the beginning and end of the stages; – Preparation and provision of customer reporting documentation; – Well business. – Delivery of the Final Report and the Cause of the well to the Customer; DAILY: • Daily Report (signed); • Operational reports; • Schedule of further works with a planning horizon of one (1) and seven (7) days; • Reports on consumption / receipts / balances of materials, equipment at SSDR, support vessels and the supply base; WEEKLY: • Report + photo report on the state of affairs and the environmental situation at the facility; • Reports on the availability of equipment at the Customer’s facilities, a report on the movement of personnel, a report on loading and movement of provision vessels with test equipment and personnel, and also providing the Customer upon request of this information (provided within 24 hours of the request). MONTHLY: • Acts of non-compliance with the items issued orders for the current month, with an indication of violations and the attachment of relevant documents; • Acts confirming unproductive time; • The report of the Specialist on the course of geological support during his stay at the Drilling Rig – the day after leaving the Rig; • Information for the current month on the identification of violations for which the cost of the well construction work is being reduced for deviating from the terms of the contract for performing drilling operations, service support contracts for well construction; • Monthly submission to the Customer’s representative of the consolidated material report on the movement of equipment and personnel at the Rig, agreed with the Contractor. PERIODICALLY (as necessary): • Acts of investigation of cases of unproductive time, accidents and incidents.

Conditions: Direct employer. Salary is discussed individually according to the results of the interview. Seasonal work during the periods July – October / November 2019, 2020, 2021. Possible work in the period December – June on the land projects of the Russian Federation. Employment according to the labor legislation of the Russian Federation. Work traveling or rotational nature, offshore fields, 30/30 days. Base City – Moscow, area of ​​work – about. Sakhalin.

Contact details: Head of Human Resources Department "Oil Service Technology" Stepchenkova Natalya Alekseevna

For inspections at the manufacturing plants of the Russian Federation and in foreign countries, inspectors are invited to receive equipment (capacitive, block, metal, mechanical, electrical).

Requirements: – higher technical education; – current certification for non-destructive types of control (VIC); – experience in the inspection of at least 1 year (experience in the WGC, Quality Control Department or the quality service are welcome); – knowledge of current standards and technical requirements for equipment; – confident PC user (Internet, mail, office software).

Responsibilities: – carrying out inspection of equipment at manufacturers of equipment for the oil and gas industry in accordance with the technical specifications of the customer; – making report; – registration of instructions and notifications; – paperwork on shipment – compliance with the requirements of OT

Conditions: – Accommodation, travel at the expense of the employer; – Traveling nature of work; – Reward from 45-65

Please send your CV to ilyasov @

Requirements: Secondary vocational education; Experience from 2 years. Responsibilities: 1. Repair, adjustment, testing and delivery of simple, magnetoelectric, electromagnetic, optical-mechanical and heat measuring instruments and mechanisms. 2. Repair, assembly, testing, adjustment, testing, adjustment, installation and delivery of heat measuring, electromagnetic, electrodynamic, counting, optical-mechanical, pyrometric, automatic, recording and other devices of medium complexity with the removal of circuits. 3. Repair, adjustment, testing, adjustment, installation and delivery of complex electromagnetic, electrodynamic, heat measuring, optical-mechanical, counting, automatic, pyrotechnic and other devices with fitting and fine-tuning of parts and assemblies. 4. Determining the causes and troubleshooting simple instruments. 5. Installation of simple wiring diagrams. 6. Compilation and installation of complex wiring diagrams. 7. Compilation and installation of connection diagrams of average complexity. 8. Coiling of wire springs in a cold state, protective lubrication of parts. 9. Verification of electrical measuring instruments of accuracy class 0.5 and below using the method of comparison of indications with indications of reference instruments. 10. Verification of electrical measuring instruments of accuracy class 0.5 and higher by means of comparison and compensation methods. 11. Acceptance, testing, adjustment and testing of special electrical and radio measuring devices and pressure and vacuum devices up to class 1.0. 12. Temperature measurement by a thermoelectric pyrometer and an electrical resistance thermometer. 13. Verification of assemblies and various elements of electronic devices using electrical circuits using test equipment and instruments. 14. Verification and adjustment of automation units with complex electronic circuits; amplifiers, control units on software-controlled machines. 15. Check of radio measuring devices of all types and systems intended for measurement of physical quantities. 16. Conduct arbitration measurements. 17. Check of installations for measurement of parameters of electronic, semiconductor devices, integrated and logic circuits. 18. Electric adjustment of nodes and elements of radio devices of average complexity. 19. Electrical adjustment special hardware and computer equipment of average complexity, adjustment of various power sources. 20. Adjustment of the main power sources of the radio part. 21. Inspection, disassembly, adjustment, inspection and testing of exemplary, analytical, carriage and technical scales of class 1, complex measuring and cutting tools, instruments, dies and accessories after their final assembly and finishing, observing the sizes of 6-7 grades. 22. Certification and marking them after verification. Coloring devices. 23. Soldering various solders (copper, silver, etc.). 24. Heat treatment of parts, followed by finishing them. 25. Determination of metal hardness by calibrated files. 26. Complete testing of the equipment with the use of instrumentation with their inclusion in the circuit and the removal of waveforms. 27. Setup and adjustment of the relay protection device, electrics, telemechanics. 28. Determination and troubleshooting of repaired devices. 29. The calculation of the absolute and relative errors in the testing and testing of devices. 30. Identification and troubleshooting of equipment. 31. Determination of the degree of wear of parts and components. 32. Adjustment and comprehensive testing after the assembly diagrams of thermal control and automation of boilers, turbines and process equipment. 33. Assembling circuits for testing devices of thermal automatics. 34. Removal of the gradient from the heat engineering equipment of high accuracy and its further certification. 35. Mathematical processing of measurement results and design of the necessary materials. 36. Drawing up defective statements and filling in passports and certificates for devices and automata. 37. Repair of devices of average complexity under the supervision of a locksmith. 38. Repair, adjustment and adjustment of particularly complex instruments and devices. 39. Take care of the property of the Employer transferred to him for the implementation of the functions assigned to him (duties) and take measures to prevent damage; promptly inform the responsible persons of the Employer or the immediate supervisor of all circumstances threatening the safety of the property entrusted to him. 40. Driving a car according to open categories and qualifications. 41. Diagnoses and repairs complex circuits of instruments for measuring temperature, pressure, fluid level, driving speed and distance traveled by cars, engine crankshaft rotation speed, alarms for reaching the limit values ​​of parameters, odometer, tachometer of an internal combustion engine. 42. Carries out diagnostics of all types of internal combustion engines, dismantling, repair of devices (units) of the ignition system, power supply, engine start, lighting and light signaling and additional electrical equipment (wipers, audible signal, ventilation equipment and transport). 43. Carries out tests on control devices and stands. 44. Knows, understands and applies the current regulatory documents relating to its activities. 45. Knows and fulfills the requirements of regulatory enactments on labor and environmental protection, complies with the norms, methods and techniques for safe work performance. 46. ​​Fire and electrical safety requirements when working and being able to use fire extinguishing agents; 47. Responsible for the health of electronic and electrical equipment. 48. Ensure proper instrument storage and maintenance of workplaces clean and in compliance with TB. 49. Track and keep records of the consumption of important spare parts and consumables, their availability and storage, as well as the correct and timely application for their delivery.

Conditions: Work on the watch 30 * 30 in the oil and gas fields of the Tyumen region of the Khanty-Mansiysk Autonomous Okrug – Ugra. Salary 131 000 rub. for the shift cycle.

Engineers of construction control of welding and civil works are invited to carry out construction control at the facilities of Transneft PJSC in Nizhny Novgorod, Ryazan, Moscow Region

Requirements: – higher technical education is required; – experience in construction in the oil and gas industry from 3 years (as a construction control engineer (technical supervision), chief welder, site manager, VET engineer and

Main responsibilities: implementation of construction quality control of welding, earthen, civil works at the facility; work with customers; verification of as-built documentation; timely identification and designation of the identified violations of the quality of construction and installation works by the construction contractor; control over the elimination of violations; maintaining current documentation; reporting.

Construction control engineers are required to work at the facilities of Transneft PJSC in the following areas: – welding and assembly work; – non-destructive testing of welded joints; – civil works; – geodesic control.

Salary level: from 60,000 rubles.

Official duties: – participation in the commission for the input quality control of materials, products and equipment arriving at construction sites; – implementation of the IC for the quality of the performance of construction and installation work in accordance with the requirements of regulatory and working documentation with the maintenance of the journal of the UK; – issuance of comments, warnings, prescriptions to the construction contractor, in the event of discrepancies, deviations or irregularities in the event of construction and installation work; – ensuring control over the activities of quality control services for construction contractors; – control of availability, correctness and timely execution of as-built documentation; – confirmation of the volume and quality of work performed by the construction contractor for compliance with the requirements of the outage and pressure regulations; – participation in the work of commissions for acceptance of objects into operation; – registration of reporting documentation and the transfer of operational information on the UK.

Requirements: Higher technical education (profile); Experience in engineering and technical positions at construction sites and / or oil and gas facilities for at least three years; Mobility, willingness to travel; Experience in the field of construction control and the availability of valid qualification certificates (NAKS, VIC, MC, RK) with access to facilities of Transneft PJSC is an advantage.

Conditions: Work in a leading engineering company at the facilities of Transneft PJSC in Nizhny Novgorod, Yaroslavl, Ryazan, Moscow Region. and Krasnodar region. Full compensation for the cost of living and travel. Providing specials clothing, office equipment and controls. Work on objects in the mode 2/1 month. Stable payroll. Opportunity for professional development and growth within the company. Salary based on interview results.

Send your resume to personal @

Invited Engineers SK for welding, NC for construction control at the facilities of PJSC "Transneft “in Nizhny Novgorod, Ryazan, Moscow region

Requirements: – higher technical education is required; – experience in construction in the oil and gas industry from 3 years (as an engineer of the UK, chief welder, head of the laboratory, head of the site, flaw detector engineer and

Main responsibilities: – implementation of construction quality control of welding and NDT at the facility; – work with customers; – verification of as-built documentation; – timely identification and designation to the contractor for the construction of identified violations of the quality of construction and installation works; – control over the elimination of violations; – keeping current documentation; – reporting.

Send your resume to personal @

Key functions: maintenance of automated control systems; BU Requirements: 1. Knowledge of the fundamentals of electrical engineering and electronics, ability to read electrical circuits; 2. Knowledge of the principles of construction of automated process control systems; 3. Skills of working with a variable frequency drive of direct, alternating current Simorec, Sinamics 120 4. Education – Higher technical 5. Computer knowledge – confident user

We offer: design by TC. Decent wages, according to the results of the interview.

Requirements: Work experience in the direction of professional activity for at least 1 year. Secondary vocational education. The ability to read the TS circuitry. Duty n: To make repair of electric equipment of the HARDWARE of different modifications. Conditions: Mode of operation: rotational method of organizing work 30 * 30 at the Chayanda field (the Far North region). salary 80 000 rub. for the shift cycle

The management company has a vacancy of the main specialist of the upstream economic planning department. Responsibilities: Conducting a comprehensive comparative analysis of production and economic activities of the supervised subsidiaries of the Company in order to improve production efficiency; Consultation of specialists of Subsidiaries on all matters within the competence of the department; Participation in the preparation of presentation reports on the results of the activities of the Exploration and Production segment; Participation in the automation of management segment reporting Requirements: Experience in an oil company is required! Understanding the basics of technological processes of enterprises of the oil and gas industry. Knowledge of the basics of accounting, budgeting, planning. At least 5 years of work in oil and gas companies; High analytical skills; Experience in the management company; Readiness for active independent work; Sociability; Confident PC user (Excel, Word, PowerPoint) Conditions: Designed in accordance with the Labor Code of the Russian Federation; Office in the center of Moscow; LCA, corporate mobile communications; High income.

In a subsidiary of an oil and gas holding, a vacancy is opened for the chief specialist of the personnel department.

budgeting staff costs, monitoring staff costs; planning and calculation of the wage bill, in

higher economic education; experience in manufacturing companies from 3 years; experience in OTIZ, C&B; knowledge of the Labor Code of the Russian Federation, features of regional regulation, rotational work method; Excel knowledge at an advanced level; knowledge of 1C: ZUP; readiness for active work in the framework of the newly created enterprise. Conditions: registration according to the Labor Code of the Russian Federation; Office in Dudinka Krasnoyarsk Territory; LCA; travel compensation to the place of work and rental housing; high wages; the possibility of professional and career growth in the oil and gas holding.

In the management of performance evaluation and long-term modeling, a vacancy is open for the head of the department for evaluating the effectiveness of oil and gas processing, trading and logistics.

Analysis and evaluation of the effectiveness of investment programs and projects, programs of technical re-equipment and reconstruction of assets of the Downstream segment; Development of financial models, analysis of capital and operating costs, scenario analysis, etc. Organization of post-investment monitoring and adjustment of the investment program; Participation in the development processes of long-term strategies for segment assets; Preparation of analytical and presentation materials for management; Methodical support of the investment program formation and project monitoring processes; The introduction and implementation of proposals to improve the efficiency of oil and gas processing, trading and logistics. Requirements: Higher education (economic, technical); Experience in investment management of downstream segment assets in oil and gas / consulting / investment companies over 5 years; Strong skills; preparation of analytical and presentation materials for management; willingness to work in Excel and Power Point "do it yourself" without assistants; Confident skills in building financial models, conducting factor analysis, sensitivity analysis; Experience in methodological support of the processes of formation and monitoring of the investment program; Responsibility, initiative, systematic; Fluency in English at a level not lower than Intermediate; Willingness to lead projects from the beginning to the end independently; Readiness for an active mode of operation, readiness for processing. Conditions: Registration according to the Labor Code of the Russian Federation; LCA, mobile communications; Office within walking distance from m. Arbat; High wages; Prospects for career and professional growth.

In the management company of the oil and gas holding, a vacancy has been opened for the head of the department for the construction and assembly of oil and gas production facilities of the Capital Construction Department.

Formation and organization of program execution cap. investments, integrated schedules for the construction of facilities, including design, provision of land for construction, provision of materials and equipment, commissioning of facilities; The organization of timely selection of contractors for the implementation of construction and assembly work in the societies of the NOC group, the conclusion of contracts; Development of LND regulatory processes of the COP. Management and management of staff in Group Societies. Requirements: Higher construction education (in the field of oil and gas construction); At least 8 years of specialized experience in the construction of oil and gas facilities; Knowledge of current regulations; Experience in the organization of work in subsidiaries; Knowledge of calendar and network planning (MS Project); Willingness to travel; Proactive view of life, stress resistance. Conditions: Registration according to the Labor Code of the Russian Federation; LCA, payment for mobile communication; Holidays 31 calendar days.

In a subsidiary with an office in Dudinka, a vacancy is open for the deputy general director for economics and finance.

Organization of effective management of financial resources of the enterprise; Work with banks on enterprise financing; Organization of the formation of long-term and medium-term plans; Organization of management reporting; Organization of the preparation of economic models; Organization of the preparation of presentations and analytical materials; Monitoring the effectiveness of procurement and contractual activities, in

Input Control Engineer The Inspection Company invites input control engineers (hardware,

Requirements: Education: HE / Cf. specialist. (technical); Work Experience: SCC Engineer, VET Engineer, Site Manager; The presence of a valid qualification certificate VIC – II level; Experience of work on the entrance control of the MTR at the oil and gas industry facilities from 3 years; Citizenship – the Russian Federation.

Supervision of the input control and documentary verification of incoming materials and equipment; Accounting Control ITC; Monitoring the storage conditions of the ITC; Checking the accompanying documentation at ITC; Writing reports.

Conditions: Payment of 60 000 per hand for the full month worked. Work in Pyt-Yah. Start of work with

Send your resume to personal @

Qualification requirements: Higher vocational (technical) education and work experience in production at least 1 year. Secondary vocational (technical) education and work experience in production at least 3 years. In the absence of special education, work experience in production is at least 5 years. Responsibilities: 1. Managing assigned employees at the facility, ensuring labor discipline. 2. The distribution of chemical reagents according to the norms of process regulations. Control of compliance with the technological processes of preparation of jamming liquids and blocking packs. Monitoring the health of the equipment. 3. Quality control of killing fluids and blocking packs;

Work on the oil fields of the Khanty-Mansi Autonomous Area

Responsibilities: • Warranty and post-warranty service, routine maintenance of top drive systems • Supervising (control of installation supervision and proper operation of equipment by the Customer), trial start of equipment, commissioning, delivery of equipment to the Customer, execution and signing of necessary documentation • Technical advice Customer’s specialists • Work at the fields or field visits for work: o diagnostics and repair o routine maintenance o my installation / dismantling o managing the balance of spare parts and tools o advising clients on issues related to equipment o training clients to work with equipment

Requirements: • man 25-50 years old • citizenship of the Russian Federation • knowledge of electricians, fundamentals of electronics, mechanics, electro-mechanics and hydraulics • PC – experienced user • responsibility

Conditions: • registration under the Labor Code of the Russian Federation • payment for mobile communication • payment for food • study abroad Preferences: Preferences for candidates with experience in operating and maintaining the Upper Drive System

Responsibilities: • Driving and safe delivery of equipment to the work site (the distance from the production base to the facility is from 10 to 300 km). • Monitoring the technical and operational status of the vehicle. • Connection of hydraulic fracturing equipment at the work site. • Participation in related work of the PIU as needed. • Responsibilities include intense physical labor.

Requirements: • Continuous driving experience in employment history of at least 3 years. • Driving license category E (with driving experience from 1 year). • It is desirable to have a tachograph card. • Readiness for intensive physical labor. • An additional advantage will be the availability of a certificate and experience as a hydraulic fracturing operator, a crane driver for truck 8p., A PPDU driver, a motorist TsA-320, and a CMU Operator.

Conditions: • Official employment. The probationary period is 3 calendar months. • Watch schedule 28×28. • Road is paid, housing is provided, work clothes are issued, VHI. • Locations: Volga-Ural region, Khanty-Mansi Autonomous Okrug, Yamal-Nenets Autonomous Okrug.

Responsibilities: • Analysis of flushing programs in order to prepare orders for the preparation and processing of drilling mud; • Drafting instructions for the preparation and processing of drilling mud and the treatment of chemical. reagents; • Drilling fluid testing to determine trends and identify contaminants; • Interpretation of data obtained during testing of drilling mud; • Identify the sources of problems associated with the drilling fluid or borehole; • Identification of chemical processing methods for optimization of drilling parameters; • Development of recommendations for customers; • Management of drilling personnel during drilling mud treatment; • Control of compliance with the rules of labor protection and safety of the Company and the customer; • Daily monitoring of drilling operations to reduce risks and eliminate drilling fluid problems.

Requirements: • Higher technical education (petroleum, chemical technology, development of oil and gas fields); • Experience in this area from 2 years; • Ready to work on a rotational basis; • Leadership and teamwork skills; • Ability to operate effectively in unusual situations; • Proficiency in English as an advantage.

Conditions: • Employment in accordance with the Labor Code of the Russian Federation; • Rotational method of work (28×28) in areas of the far north; • Competitive salary level. • Provision of LCA; • Provision of travel (air / railway); • Providing food subsidies; •Opportunity for career growth.

RESPONSIBILITIES: – Perform the specified repair and maintenance of wellhead equipment: Christmas tree, blowout preventers, collet couplings, shut-off devices, casing heads, wedges and

Requirements: – Higher technical education. – Experience in a similar direction for at least 3 years. – Preferably the presence of operating experience and product management company. – Good knowledge of English (oral and written) – High mobility, work in

Conditions: – Competitive salary level. – Watch 28h28. – Soc. package. – Opportunity for career growth.

Requirements: – A diploma of higher education (technical and natural sciences); – Grade point average from

Duties and conditions: Each newly adopted engineer is intensively developing according to a special program. It is designed for 36-48 months and in addition to the work at the field (6×3 watch) includes courses on safety, operation and maintenance of equipment, troubleshooting, technology, working with specialized computer programs, personnel management and working with customers. After the successful completion of the program, you expect career growth in office positions (technical specialist, project management, marketing and sales, and much more). We offer a decent wage, based on both personal achievements and the performance of the company as a whole. Employees working in Russia are provided with compensation and benefits in accordance with Russian labor legislation, as well as additional benefits (LCA, voluntary pension insurance program, etc.). When sending your resume, please indicate in the subject line the code and title of the vacancy.

• Driving and safe delivery of equipment to the work site (the distance from the production base to the facility is from 10 to 300 km). • Preparation of the cementing unit for work at the facility • Maintenance of power and process equipment and chassis of the cementing unit during well cementing • Compliance with safety rules at the company’s production facilities and fields of the customer • Carrying out field service work, according to official instructions

• Experience as a mechanic for at least 3 years. • The presence of a driver’s license (B, C, E). • The presence of a qualification certificate • Responsibility, efficiency, decency

Schedule 1/1 month, the work does not stop until the achievement of the task. Overtime work is paid in accordance with the Labor Code of the Russian Federation Polis VHI, the road is paid, accommodation is provided (dormitory, rental housing, overnight stay is possible in the car)

– Negotiation at all levels; – Conclusion of contracts; – Market analysis (consumers, prices, competitors); – Organizational and technical support for customers and existing projects; – Implementation of sales schedules; – Control of receivables and payables; – Planning equipment supplies; – Participation in tenders, exhibitions; – Coordination of those. assignments for the products of factories; – Preparation and submission of established reporting forms; – Control of cash flow.

– Successful sales experience of 7 years, negotiation, presentations required; – Good managerial and organizational skills, communication skills, active life position, focus on achieving results, mobility, flexibility; MANDATORY: – Successful proven sales experience in the oil and gas industry; – Knowledge of the market, the ability to work independently.

– Five-day working week, Friday for 1 hour shortened day; – Full

Responsibilities: Supervising (supervision of installation supervision and proper operation of equipment by the Customer), participation in trial launches of equipment, commissioning, delivery of equipment to the Customer, execution and signing of necessary documentation. Maintenance and training of (customer) electronic (low-voltage) and electrical ( power), mechanical and hydraulic equipment SVP.

Requirements: Citizenship of the Russian Federation Education: Higher technical (electrical engineer, electronics engineer) Experience of 2 years knowledge of electricians, fundamentals of electronics, electrical mechanics (knowledge of frequency converters, programmable logic controllers, experience with ABB equipment, c controllers of the Siemens S7-300-400 family knowledge of programs in step-7 and

We offer: Rotation method 15/15 or 30/30. Registration under the Labor Code of the Russian Federation, compensation of money for food and transportation costs. The possibility of studying abroad. Work on a rotational basis traveling

Functions: – Organization of work on the purchase of spare parts in the framework of tenders for service maintenance of equipment; – Participation in tenders for the supply of spare parts, request for commercial proposals for the cost and delivery time of spare parts, analysis of the price information received at cost; – Search and conclusion of contracts with suppliers (RF, Europe, USA, China) spare parts (original and analogous); – Negotiating with suppliers to get the best offers; – Record keeping and reporting on orders and shipments of spare parts, spare parts in the 1C program (

Requirements: – Higher technical education; – Knowledge of the product range (bearings, valves, rubber goods, hardware, high-pressure hoses and

Conditions: – Five-day working week, Friday for 1 hour shortened day; – Full

Responsibilities: • Organization of the work of service engineers for the maintenance of mechanical, hydraulic equipment of the upper drive systems; • Organization of work on accounting, primary and next checks of drilling equipment. Plotting of ultrasonic and magnetic powder inspection, inspections, molding equipment and

Requirements: • higher technical education (electrical engineer, oil equipment mechanic engineer) • basic knowledge of electricians, electrical mechanics, mechanics and hydraulics of drilling equipment, knowledge and ability to read, assembly and detail drawings, hydraulic circuits, • experience in drilling oil wells and gas, experience of working with SVP is desirable • readiness for business trips • PC – experienced user • responsibility

Conditions: • registration under the Labor Code of the Russian Federation • payment of mobile communication • payment of food • Type of employment

The driver is invited to the inspection company for an all-terrain vehicle T / s TVS-26023 Snow and Swamp-Drive Vehicle (Base: Sable). A project to control engineering surveys in the Tazovsky region of the YNAO. The scope of work until May 2019.

Requirements: A driver’s license of a tractor driver-driver (tractor driver) of category AII is MANDATORY! Education: Wed. special; Driving experience of at least 3 years of special equipment such as TREKOL; No bad habits (daily medical check-up at the medical center); Citizenship – Russia

Responsibilities: Departure to the place of work (field construction) with the engineers of the technical supervision of the company; Keeping the vehicle in good condition; Filling the waybills.

Conditions: Accommodation is provided, travel from the place of residence to the place of work is paid. Work on schedule – 1 month / 1 month.

Send your resume to personal @

Requirements: Maintenance of power and process equipment and chassis of cementing units when conducting cementing wells, hydraulic fracturing, chemical well treatment. Preparation of the cementing unit for work at the facility. Assembly, disassembly, strapping and crimping of high and low pressure lines. Participation in the process of cementing wells, hydraulic fracturing, chemical, heat treatment, killing and flushing wells, installing cement bridges. Participation in pressure testing of casing and drill pipes, manifolds. Ensuring the normal operation of the engines of the cementing unit. Determination of the end of cementing. Pumping process fluid (without pressure). Monitoring the flow rate of fluid injected into the well. Troubleshooting in the process of cementing unit operation. Driving a car, refueling. Production of preventive and maintenance repairs of the cementing unit and the car. Registration of documentation for the work. Must know: the process of drilling wells and extracting oil, gas and other minerals; technical characteristics, purpose, design, rules of operation of the cementing unit, car; device, interaction and principle of operation of all units of the unit; the process of well cementing, hydraulic fracturing, chemical treatment, washing and killing wells; types of repairs cementing unit; plumbing; basic information about the technology of workover and well development. The presence of the certificate of the engine; the presence of a driver’s license category B, C, E; experience as a mechanic of the cementing unit for at least 5 years. Knowledge of the process of operation of units 9T, SIN-32, SPM-600, and repair. Schedule: watch 30×30. Work on the Chayanda field. Salary 121 000 rub. for the shift cycle.

Requires a specialist with experience in selling services, with the desire to sell, work and earn. Payment: salary + monthly bonus on sales results (average total income of 45,000-65,000 rubles). More information about the company:

– Permanent work, full day, work on the territory of the employer. – Registration by TC

Responsibilities: * Advising existing and new customers on the company’s services * Selling information products of the company to existing and new customers * Work on actively attracting new customers (in

Requirements to the candidate Education: secondary, incomplete higher, higher Sales experience: from 2 years old Citizenship: Russia Registration Moscow or Moscow Region.

– experience in selling services from 2 years (consulting, advertising, tourism, insurance, banking, etc.) – adequacy and responsibility – a real desire to work, earn, learn and develop – attentiveness and ability to delve into the essence of things – competent oral and written speech – ability to communicate, persuade, work with objections – experience in negotiating – PC knowledge (confident user of Outlook, Word, Excel, Internet) – activity and the absence of bad habits is welcomed

We are waiting for your resume at job @

We kindly ask the recruitment agencies: DO NOT CALL and DO NOT SEND LETTERS

Requires a specialist with experience in selling services, with the desire to sell, work and earn. Payment: salary + monthly bonus on sales results (average total income of 45,000-65,000 rubles). More information about the company:

– Permanent work, full day, work on the territory of the employer. – Registration by TC

Responsibilities: * Advising existing and new customers on the company’s services * Selling information products of the company to existing and new customers * Work on actively attracting new customers (in

Requirements to the candidate Education: secondary, incomplete higher, higher Sales experience: from 2 years old Citizenship: Russia Registration Moscow or Moscow Region.

– experience in selling services from 2 years (consulting, advertising, tourism, insurance, banking, etc.) – adequacy and responsibility – a real desire to work, earn, learn and develop – attentiveness and ability to delve into the essence of things – competent oral and written speech – ability to communicate, persuade, work with objections – experience in negotiating – PC knowledge (confident user of Outlook, Word, Excel, Internet) – activity and the absence of bad habits is welcomed

We are waiting for your resume at job @

We kindly ask the recruitment agencies: DO NOT CALL and DO NOT SEND LETTERS

Requirements: Secondary special or complete secondary education, a driver’s license of category B, C, D, E., ADR, the driver’s license of a crane manipulator, driver card. Experience from 3 years Responsibilities: Manage trucks of all brands and types. Timely perform maintenance and repair of the car and all its components and assemblies. Identify faults in the car, its mechanisms and eliminate them. Undergo a daily pre-trip medical examination. Follow the rules of the road and the rules of technical operation of the vehicle. Follow the internal rules. Professional skills: Driving dangerous goods, the ability to work with a crane manipulator. Monitoring the technical condition of the car, timely maintenance and repair. Maintaining records of work performed. Clean and tidy technology, workplace. Independently make cosmetic repairs. The ability to quickly learn a new type (type) of technology. Conditions: Working day from 9:00 to 18:00. Five-day work week. salary 40 000 rub.

Repair of electrical equipment in the enterprise. Requirements: The presence of a document on vocational training; Having experience in the specialty profile; The need to obtain a medical opinion on the possibility of working in the conditions of the Far North; Conditions: Work in Dudinka (Krasnoyarsk Territory); Rotational method of work: 1 month / 1 month, change of 11 hours; Employment according to the Labor Code of the Russian Federation; Stable "white " wage; Accommodation in the camp; Food, clothing; Directions to the place of work; LCA; Work in the Far North Region (benefits according to the Labor Code of the Russian Federation, based on the norms of the hours worked).

Responsibilities: Work PI on wells Requirements: Certificate, confirming the right to drive a vehicle of the appropriate category; Experience at least 2 years for 6-7 category

In a subsidiary with an office in Dudinka, a vacancy is open for the deputy general director for economics and finance.

Organization of effective management of financial resources of the enterprise; Work with banks on enterprise financing; Organization of the formation of long-term and medium-term plans; Organization of management reporting; Organization of the preparation of economic models; Organization of the preparation of presentations and analytical materials; Monitoring the effectiveness of procurement and contractual activities, in

Responsibilities: construction of the winter road. Requirements: Higher education / secondary vocational education in the field of construction, road construction; Experience in the construction and maintenance of winter roads in the tundra zone for at least 2 years; Passage

Responsibilities: Transportation of fuels and lubricants (winter road); Requirements: Driving license category B, C; ADR; Experience on the winter road is required; Passage

Responsibilities: Construction of the winter road. Requirements: Higher / Secondary vocational education by profession (certificate of training); Certificate of the operator-driver (6 category); Experience in a similar position is required; Passage

Responsibilities: Repair of vehicles of the enterprise Requirements: Secondary special education; Certificate of driving license; Experience from 1 year; The need to obtain a medical opinion on the possibility of working in the conditions of the Far North; Conditions: Work in Dudinka (Krasnoyarsk Territory); Rotational method of work: 1 month / 1 month, change of 11 hours; Employment according to the Labor Code of the Russian Federation; Stable "white " wage; Accommodation in the camp; Food, clothing; Directions to the place of work; LCA; Work in the Far North Region (benefits according to the Labor Code of the Russian Federation, based on the norms of the hours worked).

Like this post? Please share to your friends:
Leave a Reply