Olive leaf

Foamiran master class: flowers, crafts, brooches, hairpins, headbands with your own hands. Step-by-step photo and video workshops.

In this master class you will find step-by-step lessons on creating beautiful spring flowers – tulips from Iranian foamiran. We will create three types of tulips without patterns and two types of tulips on a universal pattern. On the eve of March 8, we will make a small bouquet of tulips, which can additionally be combined with daffodils or snowdrops of foamiran. If you proportionally reduce the pattern, you can make a small brooch or a hairpin on the basis of these spring flowers.

Content:

Foamirana closed tulip: a step-by-step workshop

Photo closed bud

To create a closed tulip you will need:

  • white, green Iranian foamiran;
  • green, brown buttery pastel;
  • iron;
  • universal mold;
  • tulip mold;
  • second glue;
  • scissors;
  • wire 1.2 mm;
  • cocktail tubule;
  • tape green.

Patterns and blanks for making flowers

From white foamiran we cut out 6 rectangles for tulip petals 4 * 3 cm 6 in size and from green foamiran 2 rectangles 10 * 5 cm for tulip leaves.

Making Tulip Petals

Cut out 6 petals in the form of droplets from white rectangles and cut tulip leaves from green ones.

The petals of tulips are heated on the iron at a temperature of silk-wool and quickly applied to the tulip mold and closed with a sponge and strongly pressed.

Making tulip leaves

The edges of the leaves are tinted a little by pastel with the pencil itself and pastel the central vein of the leaves.

We heat the leaves on the iron at a temperature of silk-wool and squeeze well on the universal mold.

Step by step photo of flower assembly

We take the wire, the length of which depends on the height of the vase, basket and pots where you will place the tulips. Make a loop on the tip of the wire and glue a strip of 1 * 1.5 cm white foamiran in the form of a barrel.

Glue the strip on the same level.

Glue the three petals around the base, glue the petals directly on the base. At the bottom of the petals do not press to the base.

Glue the second row of petals to close the gaps, that is, between the petals of the first row. Apply glue to the edge of the petals. Take a green pastel pastel and lightly put on a sponge and pass slightly along the bottom of the petals.

Take the cocktail tube and thicken the stem of a tulip.

We take the green tape tape, cut it in half and process the stem of a tulip.

We take the leaves of a tulip and glue below the flower 4-5 cm. At the beginning we glue the leaf to smaller, as if hugging the stem, the second leaf is closed half of the first leaf and also hugs the stem.

Closed white tulip ready.

Terry tulip from Thomas

Many flowers that are made from foamiran have unusual fringed petals. Such flowers in everyday life are called terry. We will make a yellow terry tulip.

To create a terry tulip you will need:

  • white, olive, green Iranian foamiran;
  • red acrylic paint;
  • iron;
  • second glue;
  • black stamens;
  • scissors;
  • wire 1.2 mm;
  • tape green.

Flower making blanks

Cut out 9 rectangles 5.5 * 4.5 from yellow foamiran

From the prepared rectangles we cut out petals in the form of droplets and tulip leaves.

Step MK

Heat leaves on the iron at a temperature of silk-wool and fold along the length of the accordion and twist. And leave the leaves to cool, to fill the foamiran form.

Then we straighten the leaves and draw out a little. Then we heat the edges on the edge of the iron and make waves.

On all the petals make notches 5mm.

Petals are heated at a temperature of silk-wool and twist and give a little cool.

Then the petals straighten and pull out a dimple.

We take a red acrylic paint and apply not large strokes on both sides.

The middle of the foamiran tulip

We take the wire, a piece of olive foamiran 2 * 2cm and a piece of foil to create the middle of a tulip.

Fasten the wire to the base of the foil and glue it with foamiran. Good gluing bottom.

From the top inside the roller we drop a drop of glue and clamp and squeeze it across, with the letter “T”, forming the stigma of the pistil.

Take the black stamens and glue the pistil around with stamens.

Glue to the petal ready

The second and third row of petals are sticking in staggered order.

The flower is ready. Now we need to process the wire.

We process the wire with tape and make it thicker by putting a cocktail tube on it.

And again we process the stem with green tape.

Glue the leaves hugging the stem. Terry tulip ready.

So beautiful and original, you can make a gift to your loved ones.

How to make a blooming red tulip do it yourself

To create a tulip you will need:

  • red, olive, green Iranian foamiran;
  • red, yellow, black acrylic paint;
  • iron;
  • second glue;
  • black stamens;
  • scissors;
  • wire 1.2 mm;
  • tape green.

Cut out rectangles of 3.5 * 5.5 cm from the red foamiran, 3 pieces and 4 * 7 cm – 3 pieces.

Olive leaf

From the rectangles we cut out the petals of tulips in the form of a droplet with patterned edges of the top of the petals.

Take a black acrylic paint and put tinted on the petals. Tinted applied on one side.

Yellow acrylic paint tinted the end of the petals and the bottom of the petals.

We take the wire 28-30№ 6-8 cm and glue to the petals on the front side.

We take shrove yellow pastel and slightly tint the petal on both sides.

Then we take large petals and heat the edge of the petals on the edge of the iron and make waves.

The center of the tulip pistil and stamens are also formed, as described above in the master class.

Apply three petals to the base of the tulip and fasten them with tape.

Staggered fasten the second row of petals.

Then we make the stem thickening at the beginning with foamiran.

We take the cocktail tube and dress it on the stem.

We process the stem with tape.

Cut green leaves from green foamiran and process them on an iron.

Leaves make wavy more realistic.

And glue the leaves to the stalk.

Here is another type of tulip.

Bud of foamiran tulip on the universal pattern

Tulip bud will do on the universal pattern.

To create a tulip bud, you will need:

  • red, olive, green Iranian foamiran;
  • iron;
  • second glue;
  • mold tulip, peony;
  • foil;
  • scissors;
  • wire 1.2 mm;
  • tape green.

Tulip bud pattern

Here is a pattern for the flower we need. Cut out the red foamiran according to the pattern 2 petal circles.

Step-by-step photo of the tulip assembly for beginners

We take a piece of foil 15 * 29 and form the middle of a tulip bud.

Foil-shaped droplet attached to the wire.

The first petal circle is processed individually on the tulip mold.

Then at the corner of the iron, we warm the bottom of the petal and slightly bend the petals to the top, the edges of the petals are also heated and slightly twisted.

The second petal circle is processed on the peony mold. Then on the edge of the iron, warm the edges of the petal and slightly twist.

On the base we glue the petal circle, closing with the petals of the base of foil.

You can not stick the petals.

In a checkerboard pattern, glue the second flap circle.

Take the cocktail tube and produce a thickening of the stem.

We process the stem with tape and glue a piece of paper.

Tulip bud ready.

Opened tulip on the universal pattern

Making an open tulip with your own hands, using a universal pattern.

To create a pale pink blooming tulip, you will need:

  • white, olive, green Iranian foamiran;
  • iron;
  • green and pink butter pastels;
  • second glue;
  • peony mold;
  • yellow stamens;
  • scissors;
  • wire 1.2 mm;
  • tape green.

Pattern of tulip flower from foamirana

According to this pattern, cut two flap circles.

On the universal pattern of white foamiran cut 2 flap circles.

Learning from the photo to do blooming tulips

Petals are processed on the mold peony, each petal separately.

In the middle of petal circles we tint from two sides with light green pastel.

Then we tint the petals with strokes of pink oily pastel on both sides.

Olive leaf

From the olive formation create the middle of a tulip.

Pestle pasted yellow stamens.

Olive leaf

In the middle of the dressing flap circles are glued at the base. The second petal circle glue the petals staggered.

We also produce a thickening of the stem. Thickening can be done with cocktail tubes or in other ways that you can see in the master class. Foamiran gerberas.

We process the stem with tapes and glue the leaves of the tulip. Our tulip is ready.

I hope you were useful workshops. If something remains unclear, ask your questions in the comments. Wonderful spring mood!

Like this post? Please share to your friends:
Leave a Reply